Ready to use Ceramic Sio2 shampoo
An innovative, well-foaming ceramic SiO2 shampoo Reloud-X RTU with a neutral pH. It creates a thin layer of SiO2 on the surface, which provides a deep shine and creates a self-cleaning hydrophobic effect that lasts up to a few weeks. The cleaned surface makes future maintenance easier. The ceramic SiO2 shampoo complements surfaces previously treated with ceramic surface protection.
Features
- Reload-X shampoo creates an extremely glossy and slippery layer
- Anti-static effect
- Ceramic SiO2 shampoo reduces adhesion of dirt to the surface, including (tar, salts, insects, grease, bird droppings)
- Hydrophobic water-repellent layer
- Shampoo Reloud-X RTU creates a dirt-repellent layer on the surface
- Self-cleaning effect
- Creates a UV-protective layer on the surface (UV-A; UV-8)
Usage instructions
- Ceramic shampoo Reloud-X RTU ready to use
- Pre-wash the vehicle with a tar remover and a strong pre-wash cleaner
- When treating with the shampoo, wash no more than half of the vehicle at a time, then rinse the surface with a pressure washer
- Use a clean sponge/wash mitt. Spray the product onto the sponge and the wet surface to be cleaned. Clean with the sponge, rinsing the sponge in a bucket in between
- Rinse the surface thoroughly immediately after treatment
- Do not let the product dry on the surface, and avoid washing in direct sunlight or on hot surfaces
- For a medium-sized car, use about 200 ml (150 sprays)
- After washing, dry the surface with a microfiber cloth.
Ingredients
- < 5% Non-ionic surfactants, perfume, preservation agents
Warning
Causes severe skin burns and eye damage. If medical advice is needed, have a product container or label at hand. Keep out of reach of children. Wash thoroughly after handling. Wear protective gloves / protective clothing/eye protection / protective footwear. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/containers according to the separate collection system used in your municipality.
