Horizontal fixture clamp WNS‑SET‑MFT

Precise and fast for MFT workbenches

• Quick fixing thanks to clamping levers on the side
• Makes full-surface working of the workpiece possible – even round and flat parts
• Patented pull-down mechanism prevents the workpiece from lifting from the table surface when clamping – even without fastening screws
• Bench dog BH-MFT can also be used as a universal limit stop for workpieces
• Upper and lower section made of reinforced PA6 plastic
• Rail made of hardened steel, burnished
• Lever made of reinforced PA6 plastic
• Connecting elements made of steel, galvanized or burnished

Technical data

• For fastening hole - D 20 mm
• Clamping force up to 750 N
• Weight - 0,92 kg

Applications

• For using on multifunction tables such as Festool MFT and Sortimo WorkMo with hole diameter of 20 mm and plate thickness of min. 19 mm

Items included

• Horizontal fixture clamp  - 2 pcs
• Bench dog BH-MFT - 2 pcs
• Knurled nut - 4 pcs

Safety instruction

• Clamping tools are not suitable for lifting, pulling or transporting
• Clamping tools may only be clamped manually without using any auxiliary tools
• Improper use can cause personal injuries or material damage
• Never change or modify clamping tools. Only use them in their original condition. Only use original spare parts if required

Care instructions

• Clean the clamp rails with solvent
• Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
• Clean clamp in regular cycles, depending on the degree of soiling