Raw wood effect oil for light-coloured wooden furniture
Features
- VOC-free* raw wood effect oil for solid wood furniture and stair treads in interior living areas
- Natural look, makes the wood appear untreated and freshly sanded
- For brush and spray application - good standing on vertical surfaces
- Applicable on untreated light softwood and hardwood (oak, spruce, fir or ash).
- Especially suitable for tables, chairs, benches, beds, doors, chests of drawers and cupboards
- Surface is breathably protected, easy to work over, and does not flake or crack
- No risk of spontaneous combustion
- Ö10+, DIBt-certified, suitable for children's toys, saliva and perspiration resistant, cobalt/oxime free
Application
- Sand the wood surface carefully, start with coarse sanding, final sanding for furniture P180-240, for floors P100-150
- Wood moisture: 8-12%
- The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust
- Shake or stir well the contents of the container.
- Apply the material at room temperature and shake/stir well
- Tool - brush or flat brush, abrasive sponge grain P220, pad beige
- First oil application: Apply oil evenly and generously with a brush or flat brush in the direction of the grain.
- Intermediate drying: Allow oil application to dry for at least 2 hours.
- Manual intermediate sanding: Now sand the dried oil application in the grain direction with grit P220-P280. Dust the surface well.
- Second oil application: Then apply the second oil coat evenly with a brush or flat brush in the direction of the grain.
- Polish: Immediately massage in the wet oil with a beige pad by hand or polishing machine without leaving any residue
- Remove excess oil that cannot be massaged in with a cotton cloth or oil-absorbent cloth and polish the surface with a polishing pad. During application, a colour deepening occurs in the wet phase, which disappears after complete drying. In case of spray application, ensure even distribution by blending
- Shelf life: Unopened at least 24 months. Protect from frost
- Cleaning brushes and other tools: Clean tools with water immediately after use
Consumption
- 2 coats, depending on the absorbency of the substrate 40-60 g/m² per coat (15- 25 m²/l).
Drying
Depending on humidity & temperature, the surface is: dust-dry after 1 hour, fully hardened after 3-5 days. During this time, treat gently and protect from water.
Optics
OLI-NATURA Scandic-Oil "For Furniture" almost does not emphasise the natural colour of light woods. In addition, the VOC-free raw wood effect oil does not tend to pore marking. Wood is allowed to remain wood and should feel like it looks: pure and natural! It is particularly recommended for oak, spruce, fir or ash. The oiled wood surface looks as if it has been freshly sanded and untreated. Nevertheless, the wood is »invisibly« protected.
Quality
The OLI-NATURA Scandic-Oil »For Furniture« based on natural oils emulsified in water, brings design-oriented and health-conscious living into harmony.
The raw materials used are harmless and are refined in a complex process. It is VOC-free, environmentally friendly and healthy to live with and is manufactured without compounds containing cobalt or oximes. In addition, the hydro-oil is very mild-smelling and produces surfaces that are open to diffusion, creating optimal conditions for an excellent indoor climate.
The dried coating is harmless to humans, animals and plants, complies with DIN EN 71-3 (safety of toys) and DIN 53160 (saliva and perspiration resistant) and is a building product approved by the German Institute for Building Technology (DIBt). Thanks to the intelligent formula, the oil-soaked rags, pads or brushes do not tend to self-ignite.
Care
- A coordinated maintenance concept ensures a long service life and the sustainability of the surface
- Dust deposits are simply wiped off with a dry, possibly damp, but never wet cloth
- Regular moist care with »OLI-NATURA Wood Soap« ensures quick cleanliness and regreasing. With »OLI-NATURA Wood-Refresher«, the wood can be refreshed again and again. It renews the protective effect and provides a water-repellent surface without changing the colour tone of the wood. It also nourishes and cares for the wood and creates an antistatic surface so that little dust is attracted
- Good indications of the need for surface care are: When the water resistance decreases and/or the surface feels dry and brittle
- Worn areas that have been treated with OLI-NATURA Scandic-Oil "For Furniture" can be partially sanded and re-oiled without having to treat the entire surface again
Safety
- Regulation (EC) No 1272/2008
- Precautionary statements - P102 Keep out of reach of children
- Special labelling of certain mixtures - EUH208 Contains 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May cause allergic reactions.
Testing standards
- Giscode Ö10+
- Z-157.10-217 (Emission-tested building product according to DIBt principles)
- DIN 71-3 (Safety of toys)
- DIN 53160 (saliva and sweat proof)
- FREE of formaldehyde, cobalt and oximes
*The product does not contain volatile organic compounds in accordance with DIN EN ISO 11890-2
