Professional parquet and furniture High Solid finishing oil
The OLI-NATURA HS Profi Oil based on natural oils, is particularly well suited for floorboards, parquet and wooden floors. The solvent-free OLI-NATURA HS Profi Oil protects wooden surfaces at the highest level. Thanks to the high solid content of 100%it is highly productive and creates an extremely durable, dirt and water-repellent natural oil surface with its matt look and natural feel, which is not only at the feet of barefoot lovers.
The OLI-NATURA HS Professional Oil is based on modified vegetable oils such as linseed oil and wood oil. It offers the highest Giscode rating Ö10+ because it is formulated without solvents and is free of oximes and cobalt. That is why our OLI-NATURA HS Profiöl is so healthy for the home and suitable for children's toys. At the same time, the cured material is saliva- and perspiration-proof and thus harmless tohumans, animals and plantsas well as a building product approved by the German Institute for Building Technology (DIBt).
Features
- for untreated, open-pore oiled or newly sanded wood types, especially for wooden floors.
- professional quality: 100% high-solid impregnating oil on natural oil basis for maximum wood saturation with only one application
- solvent-free, fast curing in colourless and in colour
- modified vegetable oils such as linseed oil; isoparaffinic hydrocarbon of pharmaceutical quality; lead-free drying agents.
- extremely economical
- penetrates deep into the wood, creates breathable, water and dirt-repellent natural oil surfaces that are long-lasting and easy to care
- skid resistant
- highly wear-resistant
Available Tones
Natural/Colourless, Basalt, Tobacco, Barrique, Smoky, Alaska Grey, Glacier Grey, Chalk White, Polar White, Teak, Walnut, Wenge.
Application
- For the basic treatment of untreated floorboards, parquet, wooden and cork floors. Also suitable for OSB floors and veneers, however, the effect here can be limited.
- Ideal oil for parquet and furniture oil
- Sand the wood surface carefully, start with coarse sanding, surface finely sanded (floors: 100-150, furniture: 180-240)
- The surface must be dry, thoroughly cleaned and free from oil, wax, grease, silicone and sanding dust. Apply material at room temperature and shake/stir well!
Furniture
- Apply oil thinly and evenly in the direction of the grain with a flat brush/surface brush
- After 30 minutes exposure time in the wet phase, massage in with a beige pad until the surface appears evenly matt. Remove any excess oil with a cotton cloth/oil absorbent cloth
- Alternatively, the oil can also be sanded into the wood with a soaked, fine sanding fleece. After a short reaction time, remove any excess oil with a cotton cloth/oil absorbent cloth
- The surface should appear evenly matt
Parquet, Wood floors
- Apply oil evenly thinly in sections for 5-10 m² with a microfibre roller, oil applicator, oil brush or flat brush
- After 30–60 min., work the oil in with a single-disc machine and beige pad until the wood is saturated and appears evenly matt.
- Finish by polishing/removing excess with a polishing pad/oil-absorbent cotton cloth.
Drying
- Depending on humidity and temperature, the surface is dust-dry after 1-2 hours
- Fully cured 2–3 days (24 hours with hardener). Protect from water during this time
Consumption
- 1-2 applications. Depending on the absorbency of the substrate, approx. 40-50 g/m² per application (20-25 m²/l)
Care
- Regular dusting forms the basis. For light soiling, it is usually sufficient to wipe the surface with a damp cotton cloth and then wipe dry
- Stubborn dirt can be removed gently with "OLI-NATURA Wood Soap" - diluted with water or pure, depending on the degree of soiling
- Do not use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection
- To maintain the protective effect, oil the wood occasionally. To do this, simply apply a little oil to a beige pad or cotton cloth and massage in gently.
Safety
Oil-soaked rags/pads can self-ignite due to heat build-up! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting.
Testing standards
- EU – Decopaint Directive
- Z-157.10- 17 (low-emission; certified construction product in accordance with DIBt standards)
- DIN 71-3 (safety of toys)
- DIN 53160 (saliva and sweat-proof)
- Free of formaldehyde and aromatic compounds
- Without biocidal substances and preservatives
