High-quality finishing oil with universal application
OLI-NATURA Project Oil is a universal oil made of modified natural resins with a 60% proportion of solids with no wax component. It is suitable for the entire range of wooden interiors, particularly furniture. Its ease of handling allows it to be applied either with a brush, roller or airbrush.
The intensively penetrating oil has a visually appealing effect; it produces an even protection from inside and is therefore extremely resistant to wear. The wooden surface is still able to breathe, repel water, and regulate moisture. Cover with Hard Wax Oil for an extra layer of protection!
- universal and deep-acting impregnating oil
- very easy to apply – for all untreated, open-pore and freshly sanded wood types
- high inherent penetration – penetrates deeply into the wood and protects it from the inside
- suitable for indoor and outdoor use
- quick-drying
- breathable, dirt and water-repellent – repairable in sections
- vibrant depth of colour
- suitable for children’s toys, saliva and perspiration resistant, cobalt/oxime free
- ingredients - modified vegetable oils such as linseed oil; isoparaffinic hydrocarbon of pharmaceutical quality; lead-free drying agents.
Available in 7 tones
Natural/Colourless, Smoky, Alaska Grey, Glacier Grey, Lime White, Teak, Walnut, Wenge.
Application
For the basic treatment and care of all common wood types used for furniture and interior fittings, such as working surfaces, doors, panelling, stairs, floorboards, parquet, wooden and cork floors as well as for wooden objects outside and in wetrooms. Also suitable for OSB boards and veneers. However, the effect there can be limited
- The surface must be finely sanded, starting with coarse sanding, and final sanding for furniture grit P180-240, for floors grit P100-150
- Wood moisture: 8-12%
- The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust
- Apply the material at room temperature and shake or stir well the contents of the container. Do not apply at floor temperatures below 12°C
- Drying data refers to measurements under everyday conditions of 20°C and 50% humidity
- Do not oil wooden objects outside in damp weather or under direct sunlight
Furniture
- Apply oil with a flat brush evenly and thinly in the direction of the wood grain
- After 20 - 30 minutes in the wet phase, buff it in with a white or beige pad until the surface appears evenly matt.
- Remove any excess oil with a cotton cloth
- Do a final polishing with a cotton cloth
- After a drying time of 6 to 8 hours, a second coat can be applied as described above
- Drying time - Depending on the humidity and the temperature, the oil is fully hardened after 2 to 3 days. Protect the surface from water during this time.
- Cleaning brushes and other tools: Clean tools with water immediately after use
Floors
- Apply in 5–10 m² sections evenly and thinly with a microfibre roller, oil applicator, oil brush or surface flat brush
- After 20–30 minutes in the wet phase, buff it in with a white or beige pad by hand or polishing machine until the surface appears evenly matt
- Remove excess oil with a cotton cloth or oil-absorbent cloth. The surface should feel dry
- After drying 6-8 hours, apply a second coat without intermediate sanding as described above.
- Drying time - Depending on the humidity and temperature, the oil is touch-dry after 1 - 2 hours. The oil is fully hardened after 2 to 3 days, protect the surface from water during this time.
Consumption
- 1 - 2 coats, depending on the absorbency of the substrate, 40-50 g/m² per coat (20- 25 m²/l)
Danger of spontaneous combustion! Do not ball up rags. Clean used cloths/pads directly after use or keep them in a sealed container filled with water. Dispose of empty cans or unused portions in accordance with local, provincial, and federal regulations.
Care
- A coordinated maintenance concept ensures a long service life and the sustainability of the surface
- Dust deposits are simply wiped off with a dry, possibly damp, but never wet cloth
- Regular moist care with "OLI-NATURA Wood Soap" ensures quick cleanliness and regreasing.
- Good indications of the need for surface care are: When the water resistance decreases and/or the surface feels dry and brittle
- Worn areas that have been treated with "OLI-NATURA Project Oil", (if necessary, mixed at a ratio of 1:1 with OLI-NATURA oil thinner), can be partially sanded and re-oiled without having to treat the entire surface again
- If you wish for another wax layer, use OLI-NATURA care wax. For common maintenance cleaning, we recommend "OLI-NATURA Wood Soap"
Safety
- Regulation (EC) No 1272/2008
- Precautionary statements - P102 Keep out of reach of children
- Special labelling of certain mixtures - EUH208 Contains 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May cause allergic reactions
- Cloths/pads soaked with oil can ignite spontaneously due to heat build-up! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting
Testing standards
- In accordance with the Decopaint regulation
- DIN EN 71-3 (Saliva tested and Safety for children’s toys)
- DIN 68861 / 1C (resistance to chemicals)
- Free of formaldehyde and aromatics
- Does not contain biocidic substances or preservatives
